Jeff Lilly Restorations - 36 Ford Truck

	As seen the factory gaps were inconsistent on the vent cover. They welded the hinge on crooked.
	You can tell moisture sat in the channel. We will have to remove and rebuild it as it is too thin toward the glass..
	This is the support channel that was welded on the under side which gave us the inside lip to keep water out away from the interior.
	She blasted up pretty decent and will work fine.
	Zinc chromate for life time longevity and other generations beyond.
	This shows some of the pin holes once blasted and how thin it is.
	New metal tacked in and ready for full welding.
	Ground smooth and we are ready for the support to be re-welded in place.
	Welded in correctly the gap now looks great.